Archive for April, 2016


Almost ready to wrap the pin wire for these paper bead earrings… three weeks until Spring Arts Walk where I will display my work at The Estate Store and I have a million loose ends
Least I’m not bored when going from one project to another.

Friends have given me beads/old jewelry over the last few years – time to organize them… although the scavenger hunt of locating different stashes of beads is fun it’s also time consuming. There is the word time again It does speed past.

Started a mini macrame key ring fob and finished a mini macrame bracelet.

dang, I need brighter light and stronger glasses! This micro dark cord is hard to see

Bought these simple tags for displaying the jewelry – large ones for necklaces and small for earrings. will print a label with info for the back…

I know I could have made them but I figured for the sake of time which tends to slip away that it would be easier to purchase.

Keep arting!
e

Lesson about wearing glasses and I need to stop being so stressed so I can think clearly


the above picture shows my first batch of aromatherapy clay pendants. This is low fire clay. When i went to fire them last time I did not look at the package with my glasses on and saw only “cone 6”. Looking up the temperature chart on Internet… cone 6 is 2,232…
The cone/firing temp for “06” low fire is – 18,030… I have been stressed lately and very fuzzy thinking – it should have been a real low fire vs high fire non mistake. You can’t tell from the picture but the clay over-fired and vitrified. The pieces will make good wind chimes.

Second try – tray of shapes dried quickly during this unusual PNW warm weather:

after drying to leather hard stage, I then clean the edges a bit…

and load the kiln:

this kiln is from around 1970 and still has the original coils…

I’ve made a lot more paper beads. It is tricky to cut the paper and roll so that come out the same size.   Maybe I need my eyes checked and finally bow down to prescription glasses.

bought my tools for making “Broken Plate” jewelry:

I saw a how-to where the person used chamois cloth and inserted a piece of  wire hanger for a hanger and then cut/glued to the back of the chard. I’m going to try that…

Here’s the plates that I will practice with – bought them today at the Estate Store:

off to check the kiln temp… no more over firing.

e